Chapter 8 Optical Spectrum Measurement
Overlay trace function
Display of traces in overlay
•
The traces are shown in different colors (the active trace is green).
•
Their serial numbers are repeated at the top of the screen.
Figure 143 OSA - Overlaid traces
Swapping overlay traces
Measurements can only be made on the active trace and not on overlaid
traces. To make measurements on a trace in overlay, it must first be
swapped with the active trace.
To do this:
1
Press the
2
Press the
or
Click on the upper bar, with signature of the measurement and cursor
information (next to Mini-trace).
304
Trace
key,
and
keys, as many times as necessary.
User Manual
78000010220 Rev. 023