Unit
For example, with a 10 dB splitter, the results will be augmented by 10 dB.
The trace will be offset upwards by 10 dB. A channel measured at -30 dBm
will be displayed -20 dBm.
Display
Spectral Unit
Here the units of the x axis can be selected:
•
Frequency in THz
•
Wavelength in nm
Those parameters are valid for all traces present on the screen.
Saving configuration in a file
Once parameters have been configured, they can be kept in memory and
saved in a configuration file.
This configuration file can then be recalled in order to be recalled for future
HR OSA acquisitions.
To save parameters in a configuration file:
1
If necessary, press S
2
Select one parameter in one of the setup page (acquisition, link..)
3
Press Save Config. menu key
4
Enter a name for the configuration file using the edition keypad (max
20 characters).
Choice of compensation in dB or as a percentage of the
value measured.
ETUP
User Manual
Chapter 11 High Resolution OSA Measurement
Configuration of the instrument
to return to Setup page.
78000010220 Rev. 023
393