Storing And Reloading Results; Report Setup; Storing Results; Loading Results - Viavi 4000 V2 Manual

Chapter 5 Power meter, VFL (Visual Fault Locator) & Talkset

Storing and reloading results

Figure 22 Measurement of the Insertion Loss with a mode conditioner
Mode
Equipment (1)
conditioner
OTDR
Multimode
Source port
4 On equipment (1) select Laser START to activate the light source.

Storing and reloading results

Report Setup

Press on Setup softkey, then Report.
File(s) save in
File naming
Report As

Storing results

In order to save the results of a measurement, press Save.The file name displayed is
per the Report file naming setting. Tou can edit/change it in the keyboard if needed.
• A proprietary file is always saved. It allows to re-load results in the instrument. It is
saved with the extension .lts.
• The other files format are per the Report As setting.
• Note that the ".txt" format is equivalent to a .csv and can be opened with a
spreadsheet program, on a computer, where all measurement results can be
easily retrieved and the table format customized.

Loading results

In order to load previous power level measurements, go to the file Explorer, select a file
with the extension «.Lts» and press
38
Fiber Under Test
set the directory where the file(s) will be saved.
set the name of the file(s) by using pre-defined tags / fields previ-
ously set in Link or by entering directly a name.
Set the format of the report. Choice between .txt, .pdf and .json.
User Manual
Load > View trace(s).
74000NG012 Rev. 004
Jumper
Equipment (2)
Mainframe
Power meter
port