Overlay trace function
This very useful function enables up to eight traces to be displayed on the
screen at once:
•
either to compare traces acquired on a number of different fibers in
the same cable,
•
or to observe changes over time in traces taken of one and the same
fiber.
•
or to compare both curves get for each way of propagation in the
origin/end mode.
For this purpose, the Platform 8000 possesses an overlay memory which
can store:
•
the current trace, for comparison with further traces to be acquired
subsequently,
•
or traces previously saved, for comparison with the current trace,
Overlaying several traces stored in memory
To display two traces from the memory, deleting the current trace or traces
already loaded:
1
Press the F
2
On the
3
Select the files of the traces for display.
4
Press the
5
Press View trace(s) or
6
When loading is complete, the
trace selected is the active trace, the other trace being overlaid.
button
.
ILE
Menu/Explorer
Load
key.
User Manual
Chapter 11 High Resolution OSA Measurement
key, select Explorer.
Load traces +
config.
Results
78000010220 Rev. 023
Overlay trace function
screen appears: the first
401