Configuring The Microscope; Test Setup - Viavi SmartOTDR Mainframe User Manual

Figure 17 USB connection of the FiberChek probe
3 Touch the Home button.
4 Launch the Microscope application
More than one application may be active on the instrument (e.g., both inspection
and OTDR).
5 Connect the probe to the fiber being inspected using the appropriate tip.

Configuring the microscope

Test Setup

1 Launch the microscope application and connect a fiber to the probe inspection
tip.
User Manual
Chapter 6 Microscope application
.
7SMART102 Rev006
Configuring the microscope
31