Automatic pairing / continuity check
As soon as the secondary (B) unit is connected to the fiber, the primary (A)
unit detects it (and vice-versa).
Both unit are connected to the same fiber
Sending a message to the distant Platform
Once both Platforms are paired via the fiber to be tested, each one can
send a message to the other Platform.
This message can be sent to launch a test, to wait before launching the
test, to clean the connectors...
To send a message to the distant Product Name/Family Brand:
1
Go to the Results page.
2
Press Send a message softkey.
A new screen displays.
Figure 125 List of messages available
User Manual
Chapter 7 FiberComplete Modules
One unit is disconnected of the fiber link, or
there is a break
78000010220 Rev. 023
Performing the tests
251