File Management; Saving Attenuation Profile Measurements - Viavi 8100 V2 Series User Manual

Chapter 12 Attenuation profile

File Management

NOTE
A pdf report can also be generated from the File Explorer page
onto the T-BERD/MTS 8000 V2 or 6000/6000A (see
pdf report(s)" on page
Adding a logo to a pdf report
To display a logo (or any other image) on the upper left part of the pdf
report:
1 Go to the System Configuration screen (H
2 In the Printer menu, select File (Format)
3 In the Logo parameter, enter the full path of the image file (with file
extension)
Example: disk/Logo.jpg
4 Click on
5 Press F
must be generated.
6 Launch the report.
Once report is generated, the logo is displayed on the upper left part
of the page.

File Management

Saving Attenuation Profile measurements

If you had entered Auto store, then the results will be saved automatically.
If not, or if you want to store the results under another name, directory etc.:
436
Exit to return to
and in the Explorer, open the file for which a pdf report
ILE
User Manual
575).
Home page.
78000010220 Rev. 023
"Generating
> System Config.)
OME