1
Select the fiber number which does not need to be tested (framed in
black).
2
Click on the soft key Deactivate fiber test.
3
Repeat the process for the fibers which do not have to be tested.
Figure 89
Fibers 4 and 6 deactivated
The deactivated fibers will be skipped while moving to next fiber to test.
CAUTION
If a test is deactivated on a fiber already tested, a dialog box
displays: «You're about to delete acquisition files.
Are you sure?».
Click on Yes to confirm the deactivation, and by consequence, to
delete corresponding trace(s).
Click on No to cancel the deactivation.
View Trace
1
In the project page, click on the fiber number for which you want to
display the corresponding trace (e.g.
2
Click on View Trace(s) soft key.
The trace result page displays.
User Manual
Chapter 3 Reflectometry measurements
78000010220 Rev. 023
Smart Link Cable Option
).
171