Saving Configuration In A File - Viavi 8100 V2 Series User Manual

Chapter 13 CD measurements using phase shift method
Configuring the CD test
Measurement Points
Displays the acquisition points on the Delay curve (represented by black
crosses).
Yes
No
Show approximation formula
Displays the resulting approximation equation and the correlation coeffi-
cient on the upper left side of the trace.
Yes
No

Saving configuration in a file

Once parameters have been configured, they can be kept in memory and
saved in a configuration file.
This configuration file can then be recalled in order to be recalled for future
CD acquisitions.
To save parameters in a configuration file:
1 If necessary, press S
2 Select one parameter in one of the setup page (acquisition, link..)
3 Press Save Config. menu key
4 Enter a name for the configuration file using the edition keypad (max
20 characters).
448
All the acquisition points are displayed.
No acquisition points visible
Equation is displayed.
Equation is not visible.
ETUP
User Manual
to return to Setup page.
78000010220 Rev. 023