Launching The Acquisition - Viavi 8100 V2 Series User Manual

Auto store
Select Yes to store automatically the trace or traces resulting from each
acquisition according to the filenaming rules.

Launching the acquisition

CAUTION
Inspect & clean all fiber connections prior connecting fiber
cables into the ports.
1 Press S
The red Testing indicator goes on to show that the T-BERD/MTS is
in process of acquisition and the screen displays the trace in process
of acquisition.
2 The quality of the connection is displayed for a
few seconds (see
3 Then, a bar graph shows elapsed and remaining acquisition time.
Figure 75 Acquisition in progress
/S hard key to launch measurement.
TART TOP
Table 3 on page
Elapsed Number
acquisitio
of
User Manual
Chapter 3 Reflectometry measurements
65)
Elapse Total
acquisiti
on time
78000010220 Rev. 023
FTTH-SLM Software option
155