Unpacking The Device - Precautions; Installing A Module In A Receptacle And Removing It - Viavi 8100 V2 Series User Manual

Chapter 2 Getting started

Unpacking the device - Precautions

Unpacking the device - Precautions

We suggest that you keep the original packing material. It is designed for
reuse (unless it is damaged during shipping). Using the original packing
material ensures that the device is properly protected during shipping.
If another packaging is used (for returning the equipment for example),
Viavi cannot give warranty on good protection of the equipment.
If needed, you can obtain appropriate packing materials by contacting
Technical Assistance Center.
Installing a module in a receptacle and
removing it
With the T-BERD/MTS-8000 V2, a module may be inserted into either of
the two slots provided for the purpose. With the T-BERD/MTS-6000/6000A,
only one module may be installed into the Platform.
When a slot is vacant, it is closed by means of a cover-plate fitted with two
captive screws like those on the plug-ins.
Figure 7 Rear view of the 8000 V2 Platform 8000 (example)
14
Captive screws securing the
User Manual 78000010220 Rev. 023