Fiber Characterization With Fc2 Test Kit (Bi-Dir.); Activating The Test Functions On T-Berd/Mts 8000 V2; Activating The Test Functions On T-Berd/Mts 6000A V2 - Viavi 8100 V2 Series User Manual

4 Under Output press the button to activate the source.
When directed by the testing technician, using the Application button
ensure AP light is green, then CD.
NOTE
OBS-550 has HD mode which is High dynamic mode. By select-
ing HD mode, the EDFA amplifier built into the light source is
engaged and the output power increases substantially. In addi-
tion, the spectral range of the light source goes from 1460-1640
to 1530-1565 nm.

Fiber Characterization with FC2 Test Kit (Bi-dir.)

Once the necessary referencing measurements have been performed, a
fiber characterization can be performed, in manual mode, using a T-BERD
8000 V2 at one end and a T-BERD/MTS 6000A V2 at the other end, or
using two T-BERD/MTS 8000 V2.
Activating the test functions on T-BERD/MTS 8000
V2
1 Press the H
2 Activate test functions: select the function to activate by touching with
your finger or stylus.
Touch the desired test function a second time to turn the icon yellow.
3 Activate 6 test functions:
Activating the test functions on T-BERD/MTS 6000A
V2
1 Press the hard key S
Fiber Characterization Test Sequence in Manual mode
hard key on the 8000 V2
OME
YSTEM
User Manual
Chapter 16 Fiber Characterization
on the T-BERD/MTS 6000A V2
78000010220 Rev. 023 493