Chapter 5 Power meter and Source functions of the OTDR Modules
Result page
If the Source function is selected (either on this Platform, on the base Unit or on
an OTDR module, or on another Platform), the Power meter results page is
different:
•
The Wavelength, Unit and Zero menu keys are accessible via the menu
key Power Config.
•
The Power Ref. menu key allows to reach the Standard Ref menu key. It
also allows to reach the Jumper Ref menu key if Power meter function is
associated with Source function onto another unit (see
reference in loopback mode" on page
Result page of the Source
Once the source icon is selected, click on the S
the result page and to configure the source.
Figure 105 Source result page
Laser On / Laser Off
Activation or shut-down of the laser (same function as the
S
198
/S
button)
TART
TOP
User Manual
203).
or R
ETUP
78000010220 Rev. 023
"Carrying out the
button to display
ESULTS