Simplified Parameterization; Offline Safety Parameterization; Standard Starter Parameterizing Screens - Siemens SIMATIC ET 200pro Manual

Migration SIMATIC ET 200pro FC 108869725
Additional possibilities of installing the F-Switch module are listed in the Internet:
26694409
5.2

Simplified parameterization

New function
Just the same as for the SINAMICS G120, parameterization is performed
in one channel, and only at the end of the commissioning phase is it duplicated to
the second channel by pressing a button. As a consequence, it is no longer
necessary to enter safety parameters through two channels (for instance Hz and
kHz). Furthermore, it is no longer necessary to confirm the checksum.
NOTE This simplifies commissioning and avoids incorrect parameter assignments.
5.3

Offline safety parameterization

New function
Just the same as for the SINAMICS G120, it is now also possible to
parameterize the safety functions offline.
NOTE
Safety parameterization can already be prepared in an office environment.
5.4

Standard STARTER parameterizing screens

New function
The STARTER parameterizing screens are now the same as the
parameterizing screens of the SINAMICS G120.
NOTE It is no longer necessary to get to know a new system when changing over to a
different SINAMICS converter.
Version 1.02; FAQ-046BZQ5W 30.11.2015
Safety Functions.
19/26