Diagnostics; Led Displays On Analog Electronic Modules - Siemens SIMATIC ET 200S Manual
I/o 2ai i 2wire hs analog electronic module
Hide thumbs
Also See for SIMATIC ET 200S:
- Manual (652 pages) ,
- Operating instructions manual (418 pages) ,
- Installation and operating manual (216 pages)
Table of Contents
Advertisement
Diagnostics
3.1
LED displays on analog electronic modules
Analog electronic modules
LED displays on analog electronic modules:
①
Status and error displays by means of LEDs on analog electronic modules
The table below shows the status and error displays on the analog electronic modules.
2AI I 2WIRE HS analog electronic module (6ES7134-4GB52-0AB0)
Manual, 01/2008, A5E01001734-02
1
Batch error (red)
Event (LED)
SF
values
No configuration or incorrect
module plugged in. No load
voltage.present There is a
diagnostic message.
Cause
Check the parameter
assignment. Check the load
voltage. Evaluate the
diagnostics.
3
Remedy
15
Advertisement
Table of Contents
