V.35 Nic Cable - Polycom HDX series Reference Manual

V.35 NIC Cable

This cable connects a Polycom HDX system to Ascend network equipment. It
is used with the V.35/RS-449/RS-530 serial adapter on page
network equipment that has the HD-44 pin interface. It has HD-44 M
connectors on both ends and is used with Polycom HDX systems that have a
serial network interface card (NIC) installed.
Length
5 ft (1.65 m)
Drawings and part numbers are provided for reference only. Polycom claims no responsibility
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
Part Number RoHS Compliant
2457-10608-001 —
Cables
2-4 to connect to
2 - 5