Dcdfilter - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

dcdfilter

4 - 52
Sets or gets the filter setting of the DCD serial interface control signal (data
carrier detect). This command is only applicable if you have a V.35 network
interface connected to your system.
Syntax
dcdfilter <get|on|off>
Parameter
get
on
off
Feedback Examples
• dcdfilter on
• dcdfilter off
Comments
When this filter is enabled, DCD drops for 60 seconds before changing the call
state. The default setting for this signal is
Description
Returns the current setting.
Enables the DCD filter.
Disables the DCD filter.
.
"off"