Rts - Polycom HDX series Reference Manual

rts

Sets or gets the RTS serial interface control signal (request to send). This
command is only applicable if you have a V.35 network interface connected to
your system.
Syntax
rts <get|normal|inverted>
Parameter
get
normal
inverted
Feedback Examples
• rts normal
• rts inverted
Comments
The default setting is
Description
Returns the current setting.
Sets the signal to normal (high voltage is logic 1).
Sets the signal to inverted (low voltage is logic 1).
.
"normal"
System Commands
4 - 203