Polycom HDX series Reference Manual page 265

Integrator's Reference Manual for Polycom HDX Systems
rt
4 - 202
Sets or gets the RT serial interface control signal (receive timing: clock). This
command is only applicable if you have a V.35 network interface connected to
your system.
Syntax
rt <get|normal|inverted>
Parameter
get
normal
inverted
Feedback Examples
• rt normal
• rt inverted
Comments
The default setting is
"normal"
Description
Returns the current setting.
Sets the signal to normal (rising edge receives data).
Sets the signal to inverted (falling edge receives data).
.