Using The Api; Using The Api With An Rs-232 Interface - Polycom HDX series Reference Manual

Polycom hdx systems version 1.0

Hide thumbs Also See for HDX series:

Table of Contents

Using the API

The Application Programming Interface (API) is a set of commands for

advanced users who want to automate a Polycom HDX system. You can use

the API by connecting a control system or computer RS-232 serial port to the

Polycom HDX system. Or, you can use Telnet over the LAN to use the API.

If you use an RS-232 interface to send API commands, you must connect and

configure the control system or computer and the Polycom HDX system for

serial communication.