Priswitch - Polycom HDX series Reference Manual

priswitch

Sets or gets the PRI switch.
Syntax
priswitch get
priswitch set <att5ess|att4ess|norteldms|ni2>
priswitch set <net5/ctr4|nttins-1500|ts-038>
Parameter
get
set
att5ess|att4ess|
norteldms|ni2|
net5/ctr4|
nttins-1500|ts-038
Feedback Examples
priswitch set att5ess
returns
priswitch att5ess
Comments
If more than one switch protocol is supported, you must find out from your
telephone service provider which protocol to select. NET5/CTR4 is the
default. It is the standard ETSI protocol derived from ITU Q.931. If you change
the country settings, a new set of PRI switch protocols is loaded.
Description
Returns the current switch protocol.
Sets the PRI switch. One of the switch protocol
parameters is required.
Switch protocol values.
For E1, net5/ctr4 is the default. net5/ctr4 is the
standard ETSI protocol derived from ITU Q.931.
For T1, net5/ctr4 is also provided for certain Asian
countries, such as Japan, Hong Kong, and Taiwan.
System Commands
4 - 187