Gabk - Polycom HDX series Reference Manual

gabk

Returns global directory (address book) entries.
Syntax
gabk all
gabk batch {0..59}
gabk batch define "start_no" "stop_no"
gabk batch search "pattern" "count"
gabk letter {a..z}
gabk range "start_no" "stop_no"
gabk refresh
Parameter
all
batch
define
"start_no"
"stop_no"
search
"pattern"
"count"
letter
range
refresh
Feedback Examples
gabk all
Feedback is similar to feedback returned from the
but preceded with
gabk
Description
Returns all entries in the global directory.
Returns a batch of global directory entries in batches
(batch size determined by global directory). Requires a
batch number, which must be an integer in the range
{0..59}.
Returns a batch of entries in the range defined by
"start_no" to "stop_no." Polycom recommends using
gabk range instead of this command.
Specifies the beginning of the range of entries to return.
Specifies the end of the range of entries to return.
Specifies a batch search.
Specifies pattern to match for the batch search.
Specifies the number of entries to list that match the
pattern.
Returns entries beginning with the letter specified from
the range {a..z}. Requires one or two alphanumeric
characters. Valid characters are:
- _ / ; @ , . \
0 through 9, a through z
Returns global directory entries numbered
"start_no" through "stop_no". Requires two
integers.
Gets a more current copy of the global directory.
.
System Commands
command on page 4-4,
abk
4 - 87