Chaircontrol - Polycom HDX series Reference Manual

chaircontrol

Sends various chair control commands while the system is in a multipoint call.
Syntax
chaircontrol end_conf
chaircontrol hangup_term "term_no"
chaircontrol list
chaircontrol rel_chair
chaircontrol <register|unregister>
chaircontrol req_chair
chaircontrol req_floor
chaircontrol req_term_name "term_no"
chaircontrol req_vas
chaircontrol set_broadcaster "term_no"
chaircontrol set_password "string"
chaircontrol set_term_name "term_no" "term_name"
chaircontrol view "term_no"
chaircontrol view_broadcaster
Parameter
end_conf
hangup_term
"term_no"
list
rel_chair
register
unregister
req_chair
req_floor
req_term_name
"term_no"
req_vas
set_broadcaster
"term_no"
set_password
"string"
Description
Ends the call and returns the same feedback as
hangup_term for each site in the call.
Disconnects the specified site from the call.
Lists the sites in the call.
Releases the chair.
Registers to receive feedback on all chair control
operations.
Unregisters (stops feedback on all chair control
operations).
Requests the chair.
Requests the floor.
Requests the name for the specified terminal number.
Requests voice-activated switching.
Requests the specified terminal to become the
broadcaster.
Sets the chaircontrol password. This password is the
Meeting Password (System > Admin Settings >
General Settings > Security: Meeting Password).
System Commands
4 - 37