Bri1Enable, Bri2Enable, Bri3Enable, Bri4Enable - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

bri1enable, bri2enable, bri3enable, bri4enable

4 - 22
Sets or gets the configuration of the specified ISDN BRI line. This command is
only applicable if you have a BRI network interface connected to your system.
Syntax
bri1enable <get|yes|no>
bri2enable <get|yes|no>
bri3enable <get|yes|no>
bri4enable <get|yes|no>
Parameter
get
yes
no
Feedback Examples
• bri1enable no
• bri1enable yes
Description
Returns the status of the BRI line—yes if enabled, no if
disabled.
Enables the BRI line.
Disables the BRI line.