Briallenable - Polycom HDX series Reference Manual

briallenable

Sets or gets the configuration of all ISDN BRI lines. This command is only
applicable if you have a BRI network interface connected to your system.
Syntax
briallenable <get|yes|no>
Parameter
get
yes
no
Feedback Examples
• bri1enable yes
• bri2enable yes
• bri3enable yes
• bri4enable yes
Comments
only enables lines where the directory numbers have been
briallenable yes
populated.
Description
Returns the status of all BRI lines—yes if enabled, no if
disabled.
Enables all BRI lines.
Disables all BRI lines.
System Commands
4 - 23