Powercam Break-Out Cable - Polycom HDX series Reference Manual

PowerCam Break-Out Cable

This cable connects S-Video and control cables and a power supply to a
Polycom PowerCam camera. This combination is required when using the
PowerCam as the primary camera more than 10 ft away from the system, or as
the secondary camera. It is 8-pin mini-DIN to 3-way breakout block.
A separate power supply is required (part number 1465-52621-036).
Length
6 ft (1.8 m)
Molded PVC strain relief
8 7 6
4 3
4 3
5
2 1
2 1
P1
J2 J1
4 Pin
8 Pin DC
Mini Din
Mini Din Jack
Female
Female
Drawings and part numbers are provided for reference only. Polycom claims no responsibility
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
Part Number
2457-50526-200
P2
6' ± 2.0"
RoHS Compliant
Yes
8 Pin Mini Din
Male
Cables
2 - 25