Custom Cabling For Polycom Hdx Microphones - Polycom HDX series Reference Manual

Custom Cabling for Polycom HDX Microphones

CAT5 Shielded Cable
You can create a custom-length cable from the Polycom HDX system to the
Polycom HDX microphone. Start with the microphone cable (2457-23216-001),
and cut off the P1 end. Using the wiring tables shown, create a custom cable
from the microphone to a wall plate or other interfacing device. Next, from the
wall plate or other interfacing device, run shielded CAT5 or better cable to the
HDX system, terminating with a shielded RJ-45 plug connector.
The maximum total length from the Polycom HDX system to the first Polycom
microphone is 100 ft. The maximum length between subsequent microphones
is 25 ft.
The following diagram shows an example of longer custom cabling from a
Polycom HDX system to a Polycom microphone.
Interfacing Device
such as a Wall Plate
.
Cut and Re-terminated
Polycom HDX Microphone Cable
Cables
Polycom HDX
Microphone Cable
2 - 31