Callstate - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

callstate

4 - 30
Sets or gets the call state notification for call state events.
Syntax
callstate <get|register|unregister>
Parameter
get
register
unregister
Feedback Examples
Key off of " :"
cs
• callstate register
• returns
callstate registered
acknowledging that the session is now registered to list call state activities.
• callstate unregister
returns
callstate unregistered
The following is an example of callstate data returned after registering.
cs: call[0] chan[0] dialstr[IP:192.168.1.103] state [RINGING]
cs: call[0] chan[0] dialstr[IP:192.168.1.103] state [RINGING]
cs: call[0] chan[0] dialstr[IP:192.168.1.103] state [CONNECTED]
cs: call[0] chan[0] dialstr[IP:192.168.1.103] state [COMPLETE]
active: call[0] speed[128]
cleared: call[0] line[0] bchan[0] cause[16]
dialstr[IP:192.168.1.103]
ended: call[0]
See Also
Polycom recommends using the
command on page 4-164 instead of
nonotify
callstate unregister
For more information about call status messages, refer to Appendix C,
Messages.
Description
Returns the current setting.
Registers the system to give notification of call
activities.
Disables the register mode.
command on page 4-165 and
notify
as those notifications are easy to parse.
and
callstate register
Status