3.5Mm Screw Cage Connector - Polycom HDX series Reference Manual

3.5mm Screw Cage Connector

This 3-pin connector connects audio input and output to the Polycom HDX
system. It also connects the IR sensor input on a Polycom HDX system to an
external IR receiver, such as Xantech models 780-80, 780-90, 480-00, and
490-90.
Length
—
Top View
PIN #
1 Signal +
2 Signal - (return)
3 Shield/drain wire/ground
Drawings and part numbers are provided for reference only. Polycom claims no responsibility
or liability for the quality, performance, or reliability of cables based on these reference
drawings, other than cables provided by Polycom. Contact your Polycom distributor or
Polycom Custom/Vertical Products to order cables that meet the appropriate manufacturing
tolerances, quality, and performance parameters for your application.
The following table shows how to wire this connector for 2-wire connections,
Phoenix to RCA.
Phoenix Contact
1
2
3
Install jumper between contact 2 and contact 3 on the Phoenix connector
Part Number
1515-41597-001
1
2
3
RCA Contact
Center
Shell
—
Cables
RoHS Compliant
Yes
2 - 37