Wanipaddress - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

wanipaddress

4 - 252
Sets or gets the WAN IP address.
Syntax
wanipaddress get
wanipaddress set ["xxx.xxx.xxx.xxx"]
Parameter
set
get
"xxx.xxx.xxx.xxx"
Feedback Examples
wanipaddress set 192.168.1.122
returns
wanipaddress 192.168.1.122
Comments
The NAT Configuration option on the same page must be set to Auto,
Manual, or UPnP for this option to be available.
Description
Sets the WAN IP address when followed by the
"xxx.xxx.xxx.xxx" parameter. To erase the current
setting, omit the "xxx.xxx.xxx.xxx" parameter.
Returns the WAN IP address.
WAN IP address.