Monitor2Screensaverouput - Polycom HDX series Reference Manual

monitor2screensaverouput

Sets or gets whether to send either black video or "No Signal" to Monitor 2
when the screen saver activates.
Syntax
monitor2screensaveroutput <get|black|no_signal>
Parameter
black
no_signal
get
Feedback Examples
The command
monitor2screensaverouput black
returns
monitor2screensaverouput black
The command
monitor2screensaverouput get
returns
monitor2screensaverouput black
Command History
Introduced in VSX version 8.5.
See Also
See the
monitor1screensaverouput
Description
Sends black video to Monitor 2 when the system goes
to sleep and the screen saver activates.
Sends no signal to Monitor 2 when the system goes to
sleep and the screen saver activates.
Returns the current setting.
command on page 4-151.
System Commands
4 - 153