Integrator's Reference Manual for Polycom HDX Systems
pricsu
4 - 180
Sets or gets the PRI CSU mode for a T1 interface.
Syntax
pricsu <get|internal|external>
Parameter
get
internal
external
Feedback Examples
•
pricsu internal
•
pricsu external
Comments
By default, the T1 PRI network interface module is set for internal CSU mode.
See Also
The PRI line buildout for a T1 interface is set using the
command on page 4-183.
Description
Returns the current setting.
Sets the internal CSU mode. This is the default.
Sets the external CSU mode. When selected, you must
specify the PRI line buildout.
prilinebuildout