Screen - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

screen

4 - 204
Returns the name of the current user interface screen on the system, registers
or unregisters for screen changes, or goes to a specific user interface screen.
Syntax
screen
screen register get
screen [register|unregister]
screen "screen_name"
Parameter
screen
register
get
unregister
"screen_name"
Feedback Examples
Key off of
"screen:"
•
screen
might return
screen: adminsettings
•
screen register
might return
screen registered
systemsetup
adminsettings- screen: monitors
screen: tvmonitors
screen: cameras
Description
Returns the name of the current user interface screen if
not followed by other parameters.
Registers for user interface screen changes. In register
mode, the name of every screen accessed is listed.
Returns the registration state for screen change events
when followed by the get parameter.
Unregisters from user interface screen changes.
Changes the user interface to display the specified
screen. The supported screens depend on the system
configuration.