Isdnareacode - Polycom HDX series Reference Manual

isdnareacode

Sets or gets the ISDN area code or STD code associated with the area where the
system is used. This command is only applicable if you have an ISDN network
interface connected to your
Syntax
isdnareacode get
isdnareacode set ["area code"]
Parameter
get
set
"area code"
Feedback Examples
isdnareacode set 512
returns
isdnareacode 512
Comments
This screen is only accessible if you have a Quad BRI network interface
connected to your system.
system.
Description
Returns the area code information.
Sets the ISDN area code when followed by the "area
code" parameter. To erase the current setting, omit
"area code".
Numeric value.
System Commands
4 - 131