Subnetmask - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

subnetmask

4 - 220
Sets or gets the subnet mask of the system.
Syntax
subnetmask get
subnetmask set ["xxx.xxx.xxx.xxx"]
Parameter
get
set
"xxx.xxx.xxx.xxx"
Feedback Examples
subnetmask 10.11.12.13
restart system for changes to take effect. restart now? <y,n>
Comments
After making a change, you are prompted to restart the system.
Description
Returns the current subnet mask.
Sets the subnet mask of the system when followed by
the "xxx.xxx.xxx.xxx" parameter. To erase the
current setting, omit "xxx.xxx.xxx.xxx".
Subnet mask of the system.