Polycom HDX series Reference Manual page 229

Integrator's Reference Manual for Polycom HDX Systems
4 - 166
Parameter
sysalerts
vidsourcechanges
getregistrations
Feedback Examples
•
notify
returns something like
registered for 2 notifications:callstatus:mutestatus
•
notify callstatus
returns
notify callstatus success
acknowledging that the session is now registered to receive callstatus
notifications.
If entered again,
•
notify callstatus
returns
event/notification already active:callstatus
Callstatus Notifications are returned in the following format:
notification:callstatus:<direction>:<connection id>:<far site
name>:<far site number>:<connection status>:<speed>:<cause
code>:<calltype>
• is
direction incoming
• is a unique ID of the current call
connection id
is name of the far site
•
far site name
• is the number of the far site—IP address, ISDN number,
far site number
or extension of the far site
•
connection status
printed when the call is in ringing state,
connecting
when the call is completely connected,
disconnecting state, or
disconnected
• is the speed of the call
speed
Description
Registers the system to receive system alerts, in the
following format.
notification:sysalert:<alert
name>:<value1>[:<value2>...]
Registers the system to receive notification of camera
source changes, in the following format.
notification:vidsourcechange:<near or
far>:<camera index>:<camera name>:<people or
content>
Lists the currently active notification subscriptions.
for incoming calls or
is printed when an outgoing call is first created,
opened
disconnecting
when the call is completely
disconnected
for outgoing calls
outgoing
printed
connected
when the call is in