Prilinebuildout - Polycom HDX series Reference Manual

prilinebuildout

Sets or gets the PRI line buildout for a T1 interface.
Syntax
prilinebuildout get
prilinebuildout set <0|-7.5|-15|-22.5>
prilinebuildout set <0-133|134-266|267-399|400-533|534-665>
Parameter
get
set
0|-7.5|-15|-22.5
0-133|134-266|
267-399|400-533|
534-665
Feedback Examples
prilinebuildout set -7.5
returns
prilinebuildout -7.5
Comments
If you are using an internal CSU, enter the output attenuation in dB. If you are
using an external CSU, enter the output attenuation in feet.
See Also
The PRI CSU mode for a T1 interface is set using the
page 4-180.
Description
Returns the current setting.
Sets the PRI line buildout. It requires an output
"attenuation in dB" or an "attenuation in
feet".
Output attenuation values in dB. For internal CSUs.
Output attenuation values in feet. For external CSUs.
System Commands
command on
pricsu
4 - 183