V35Dialingprotocol - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

v35dialingprotocol

4 - 238
Sets or gets the V.35 dialing protocol. This command is only applicable if you
have a V.35 network interface connected to your system.
Syntax
v35dialingprotocol <get|rs366>
Parameter
get
rs366
Feedback Examples
v35dialingprotocol rs-366
Comments
Selecting a dialing protocol is not needed if you are using your DCE to dial the
call or if you have a dedicated connection to the far site.
Description
Returns the current setting.
Enables RS-366 as the dialing protocol. At this time,
RS-366 is the only supported dialing protocol on the
system.