Adminpassword - Polycom HDX series Reference Manual

adminpassword

Sets or gets the remote access password. This command is not supported on
the serial port.
Syntax
adminpassword get
adminpassword set ["password"]
Parameter
get
set
"password"
Feedback Examples
•
cannot change password if one is not set
password is set)
•
adminpassword set Mypsswd
returns
adminpassword Mypsswd
•
adminpassword set "My psswd"
returns
error: command has illegal parameters
Description
Returns the current remote access password.
Sets the password used for remote management of the
system if followed by the password parameter. To
erase the current setting, omit the password parameter.
User-defined password. Valid characters are: a through
z (lower and uppercase), -, _, @, /, ;, ,, ., \, 0
through 9. The password cannot include spaces.
(returned if no remote access
System Commands
4 - 7