Mtumode - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

mtumode

4 - 156
Sets or gets the MTU mode. The
change the Maximum Transmission Unit (MTU) size, to adjust for the best
interoperability with the host network. Set
to specify a value. If
mtusize
sets the MTU value to 1260.
Syntax
mtumode <get|default|specify>
Parameter
get
default
specify
Feedback Examples
Success examples:
->mtumode default
mtumode default
->mtumode specify
mtumode specify
->mtusize 660
mtusize 660
->mtusize 1140
mtusize 1140
Error examples:
->mtumode foo
error: command has illegal parameters
Command History
Introduced in VSX version 8.5.
See Also
See also the related
mtusize
and
mtumode mtusize
mtumode
is set to
mtumode default
Description
Returns the current setting.
Sets the Maximum Transmission Unit size to the
default value of 1260.
Allows you to specify a Maximum Transmission Unit
size other than the default setting.
command on page 4-157.
commands allow you to
to , then use
specify
, the system automatically