Spidnum - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

spidnum

4 - 218
Sets or gets the ISDN SPID numbers assigned to the BRI lines used by the
system. This command is only applicable if you have a BRI network interface
connected to your system.
Syntax
spidnum get <all|1b1|1b2|2b1|2b2|3b1|3b2|4b1|4b2>
spidnum set <1b1|1b2|2b1|2b2|3b1|3b2|4b1|4b2> ["spid number"]
Parameter
get
all
1b1|1b2|2b1|2b2|3b1|
3b2|4b1|4b2
set
"spid number"
Feedback Examples
• spidnum 1b1 <empty>
• spidnum 1b1 5125551212
•
spidnum get all
returns spidnums for channels 1b1 through 4b2 if there are 4 lines attached
in the above format.
Comments
SPIDs generally apply only in the United States and Canada. If you are behind
an internal phone system (PBX), SPIDs may not be required.
Description
Returns the current SPID number associated with a B
channel of a particular line.
Returns SPIDs for all channels of all lines.
The line and B channel. Valid values are:
BRI line 1, B channel 1
1b1
BRI line 1, B channel 2
1b2
BRI line 2, B channel 1
2b1
BRI line 2, B channel 2
2b2
BRI line 3, B channel 1
3b1
BRI line 3, B channel 2
3b2
BRI line 4, B channel 1
4b1
BRI line 4, B channel 2
4b2
Sets the SPID number for a B channel line when
followed by the "number" parameter. To erase the
current setting, omit "number".
Numeric string. SPID numbers are generally provided
by your network service provider.