Hostname - Polycom HDX series Reference Manual

hostname

Sets or gets the LAN host name, which is assigned to the system for TCP/IP
configuration and can be used in place of an IP address when dialing IP calls.
Syntax
hostname get
hostname set ["hostname"]
Parameter
get
set
"hostname"
Feedback Examples
•
hostname set
returns
hostname ADMIN
restart system for changes to take effect. restart now? <y,n>
•
hostname set "My"
returns
hostname My
restart system for changes to take effect. restart now? <y,n>
Comments
A LAN host name is required; it cannot be deleted or left blank. After making
a change, you are prompted to restart the system.
Description
Returns the current setting.
Sets the system's LAN host name when followed by the
"hostname" parameter. If "hostname" is omitted, the
system automatically sets it to Admin.
Character string specifying the LAN host name of the
system. The LAN host name follows these format rules:
Starts with a letter (A-a to Z-z). It is not case sensitive.
Ends with a letter (A-a to Z-z) or a number (0 to 9).
May include letters, numbers, and a hyphen.
May not be longer than 63 characters.
Note: The LAN host name is initialized during the
out-of-box setup sequence. The LAN host name is the
same as the system name, if the system name
conforms to the rules above. If the system name does
not conform to these rules, the invalid characters are
removed from the system name. If the resulting string
is empty, the default LAN host name is Admin.
System Commands
4 - 125