Integrator's Reference Manual for Polycom HDX Systems
telecountrycode
4 - 226
Sets or gets the system's telephone country code.
Syntax
telecountrycode get
telecountrycode set ["telephone_country_code"]
Parameter
get
set
"telephone_country_c
ode"
Feedback Examples
telecountrycode set 33
returns
telecountrycode 33
Comments
This code is associated with the country where the system is used. The system
is generally able to automatically determine the country code based on the
country you selected during initial system setup. This option is automatically
set by the Country.
Description
Returns the country code information.
Sets the telephone country code when followed by the
"telephone_country_code" parameter. To erase the
current setting, omit the parameter.
Numeric value. This code is the same as the ISDN
country code.