Isdncountrycode - Polycom HDX series Reference Manual

Integrator's Reference Manual for Polycom HDX Systems

isdncountrycode

4 - 132
Sets or gets the ISDN country code associated with the country where the
system is used. This command is only applicable if you have an ISDN network
interface connected to your system.
Syntax
isdncountrycode get
isdncountrycode set ["country code"]
Parameter
get
set
"country code"
Feedback Examples
isdncountrycode set 1
returns
isdncountrycode 1
Comments
The system is generally able to automatically determine the country code
based on the country you selected during initial system setup.
See Also
This command has the same function as the
page 4-226.
Description
Returns the country code information.
Sets the ISDN country code when followed by the
"country code" parameter. To erase the current
setting, omit "country code".
The ISDN country code.
telecountrycode
command on