V35Prefix - Polycom HDX series Reference Manual

v35prefix

Sets or gets the V.35 dialing prefix. It assumes that a profile has already been
selected.
Syntax
v35prefix get "valid speed"
v35prefix set "valid speed" ["value"]
Parameter
get
set
"valid speed"
"value"
Feedback Examples
• v35prefix 56 <empty>
•
v35prefix set 112 "#005"
associates the dialing prefix 005 to the speed 112 and returns
v35prefix set 112 #005
•
v35prefix set 112
clears the dialing prefix for the speed 112 and returns
v35prefix set 112
See Also
See the command on page 4-242.
v35profile
Description
Returns the current setting for "valid speed".
Sets the V.35/RS-449/RS-530 prefix when followed by
a "value" parameter. To erase the current setting, omit
the "value".
Valid speeds are 56, 64, 2x56, 112, 2x64, 128, 168,
192, 224, 256, 280, 320, 336, 384, 392, 7x64, 504,
512, 560, 576, 616, 640, 672, 704, 728, 768, 784, 832,
840, 14x64, 952, 960, 1008, 1024, 1064, 1088, 1120,
1152, 1176, 1216, 1232, 1280, 1288, 21x64, 1400,
1408, 1456, 1472, 1512, 1536, 1568, 1600, 1624,
1664, 1680, 1728, 28x64, 1856, 1920, all.
The parameter "all" lists all the available speeds and
their associated dialing prefixes.
V.35/RS-449/RS-530 prefix, which is a function of your
DCE. Consult the DCE user guide for information.
System Commands
4 - 241