Authentication Command Bounce-Port Ignore - Cisco Catalyst 3560-X Command Reference Manual

authentication command bounce-port ignore

authentication command bounce-port ignore
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-22
Downloaded from www.Manualslib.com
Use the authentication command bounce-port ignore global configuration command on the switch
stack or on a standalone switch to allow the switch to ignore a command to temporarily disable a port.
Use the no form of this command to return to the default status.
authentication command bounce-port ignore
no authentication command bounce-port ignore
This command has no arguments or keywords.
The switch accepts a RADIUS Change of Authorization (CoA) bounce port command.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
The CoA bounce port command causes a link flap, which triggers a DHCP renegotiation from the host.
This is useful when a VLAN change occurs and the endpoint is a device such as a printer, that has no
supplicant to detect the change. Use this command to configure the switch to ignore the bounce port
command.
This example shows how to instruct the switch to ignore a CoA bounce port command:
Switch(config)# authentication command bounce-port ignore
Command
authentication command
disable-port ignore
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
Description
Configures the switch to ignore a CoA disable port command.
OL-21522-02