Authentication Mac-Move Permit - Cisco Catalyst 3560-X Command Reference Manual

authentication mac-move permit

authentication mac-move permit
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-36
Downloaded from www.Manualslib.com
Use the authentication mac-move permit global configuration command to enable MAC move on a
switch. Use the no form of this command to return to the default setting.
authentication mac-move permit
no authentication mac-move permit
This command has no arguments or keywords.
MAC move is enabled.
Global configuration
Release Modification
12.2(53)SE2 This command was introduced.
The command enables authenticated hosts to move between 802.1x-enabled ports on a switch. For
example, if there is a device between an authenticated host and port, and that host moves to another port,
the authentication session is deleted from the first port, and the host is reauthenticated on the new port.
If MAC move is disabled, and an authenticated host moves to another port, it is not reauthenticated, and
a violation error occurs.
MAC move is not supported on port-security enabled 802.1x ports. If MAC move is globally configured
on the switch and a port security-enabled host moves to an 802.1x-enabled port, a violation error occurs.
This example shows how to enable MAC move on a switch:
Switch(config)# authentication mac-move permit
Command Description
authentication event Sets the action for specific authentication events.
authentication Configures a port to use web authentication as a fallback method for clients
fallback that do not support IEEE 802.1x authentication.
authentication Sets the authorization manager mode on a port.
host-mode
authentication open Enables or disables open access on a port.
authentication order Sets the order of authentication methods used on a port.
authentication Enable or disables reauthentication on a port.
periodic
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02