Authentication Periodic - Cisco Catalyst 3560-X Command Reference Manual

authentication periodic

authentication periodic
Command Default
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
Catalyst 3750-X and 3560-X Switch Command Reference
2-42
Downloaded from www.Manualslib.com
Use the authentication periodic interface configuration command to enable or disable reauthentication
on a port. Enter the no form of this command to disable reauthentication.
authentication periodic
no authentication periodic
Reauthentication is disabled.
Interface configuration
Release Modification
12.2(53)SE2 This command was introduced.
You configure the amount of time between periodic re-authentication attempts by using the
authentication timer reauthentication interface configuration command.
This example shows how to enable periodic reauthentication on a port:
Switch(config-if)# authentication periodic
This example shows how to disable periodic reauthentication on a port:
Switch(config-if)# no authentication periodic
You can verify your settings by entering the show authentication privileged EXEC command.
Command Description
authentication Configures the port mode as unidirectional or bidirectional.
control-direction
authentication event Sets the action for specific authentication events.
authentication Configures a port to use web authentication as a fallback method for clients
fallback that do not support IEEE 802.1x authentication.
authentication Sets the authorization manager mode on a port.
host-mode
authentication open Enables or disable open access on a port.
authentication order Sets the order of authentication methods used on a port.
authentication Enables manual control of the port authorization state.
port-control
authentication Adds an authentication method to the port-priority list.
priority
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
OL-21522-02