Set Ip Next-Hop Verify-Availability - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands

set ip next-hop verify-availability

To configure the route map to verify the reachability of the tracked object, use the set ip next-hop
verify-availability command. To return to the default value, use the no form of this command.
Syntax Description
next-hop-address
track
object
load-share
Command Default The NTP clock synchronization tolerance is set to 0 percent.
Command Modes
UDP jitter configuration mode (config-ip-sla-jitter)
Route-map configuration (config-route-map)
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure the route map to verify the reachability of the tracked object:
switch(config-route-map)# set ip next-hop verify-availability 10.3.3.2
track 1
Related Commands Command
show ip sla auto group Displays the configuration including default values of IP SLAs auto-measure
OL-27555-03
set ip next-hop verify-availability next-hop-address [track object] [load-share]
no set ip next-hop verify-availability next-hop-address [track object] [load-share]
IP address of the next hop to which packets will be forwarded.
(Optional) The tracking method is track.
Object number that the tracking subsystem is tracking. The acceptable range
is from 1 to 500.
(Optional) Enables load sharing.
Modification
This command was introduced.
Description
groups.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
set ip next-hop verify-availability
1-39