Mon Mode - ZyXEL Communications NXC2500 User Manual

Table 45 Configuration > Wireless > AP Management > Edit AP List (continued)
LABEL
Radio 1/2 Profile
Force Overwrite
VLAN Config
Management VLAN
ID
As Native VLAN
OK
Cancel

7.4 MON Mode

Use this screen to assign APs either to the rogue AP list or the friendly AP list. A rogue AP is a
wireless access point operating in a network's coverage area that is not under the control of the
network administrator, and which can potentially open up holes in a network's security.
Click Configuration > Wireless > MON Mode to access this screen.
Figure 45 Configuration > Wireless > MON Mode
Each field is described in the following table.
Table 46 Configuration > Wireless > MON Mode
LABEL
Rogue/Friendly AP List
Add
Edit
Remove
NXC2500 User's Guide
DESCRIPTION
Select a profile from the list. If no profile exists, you can create a new one through the
Create new Object menu.
Select this to have the NXC change the AP's management VLAN to match the
configuration in this screen.
Enter a VLAN ID for this AP.
Select this option to treat this VLAN ID as a VLAN created on the NXC and not one
assigned to it from outside the network.
Click OK to save your changes back to the NXC.
Click Cancel to close the window with changes unsaved.
DESCRIPTION
Click this button to add an AP to the list and assign it either friendly or rogue
status.
Select an AP in the list to edit and reassign its status.
Select an AP in the list to remove.
Chapter 7 Wireless
93